Free Ground Shipping To The Continental US
Contact H-Mac

Toll Free: 877-301-4660

Call For Volume Discounts

Beacon Morris | BRT030A1PSA21A Unit Heater | 30,000 BTU/HR Input | Propane | 208 Volts 1 Phase | Aluminized Steel Heat Exchanger | 0-4,999 Ft. Elevation

Price as configured: $0.00

Usually Ships: 2-3 Weeks

Certain options and accessories may extend the lead time. Please see options and accessories for details. Ships via UPS or FedEx Ground. Multiple quantities may ship via truck.

Shipping

Quick Overview

The Beacon Morris Model BRT030A1PSA21A low profile gas-fired unit heater is a highly efficient, extremely versatile product. These propeller units combine the latest tubular heat exchanger technology with a unique single orifice burner system. Units are available in sizes ranging from 30,000 BTU/HR to 120,000 BTU/HR in a compact, low profile design. Beacon Morris BRT units are agency certified for both standard and separated combustion venting. The unit can be installed as a separated combustion unit with the addition of a Beacon Morris concentric vent kit accessory.

Beacon Morris | BRT030A1PSA21A Unit Heater | 30,000 BTU/HR Input | Propane | 208 Volts 1 Phase | Aluminized Steel Heat Exchanger | 0-4,999 Ft. Elevation

Double click on above image to view full picture

Zoom Out
Zoom In
  • Free Ground Shipping to the Continental US
  • Multiple Item Discounts. Call for a custom quote!
  • See a lower price elsewhere? Call us!
 
Configure

Configure Product


Beacon Morris | BRT030A1PSA21A Unit Heater | 30,000 BTU/HR Input | Propane | 208 Volts 1 Phase | Aluminized Steel Heat Exchanger | 0-4,999 Ft. Elevation

  • - AS-S3-30
    +$11.00
  • AS-S3-30 Stainless Steel Flue Collector (Factory Installed)

    +$11.00

    Upgrade the standard aluminized steel flue collector to a higher grade 409 stainless steel.
  • - HoneywellTH5110D1022
    +$89.00
  • Honeywell TH5110D1022 Wall Mounted Thermostat With Digital Display And Fan Switch (Field Installed)

    +$89.00

    Honeywell TH5110D1022 Operating Manual

    Honeywell TH5110D1022 Installation Guide

    Honeywell TH5110D1022 wall mounted thermostat with digital display, fan switch and 40-90F setpoint range.

  • - HoneywellTH6110D1005
    +$104.00
  • Honeywell TH6110D1005 Wall Mounted Thermostat, Programmable With Digital Display And Fan Switch (Field Inst ...

    +$104.00

    Honeywell TH6110D1005 Operating Manual

    Honeywell TH6110D1005 Installation Guide

    Honeywell TH6110D1005 wall mounted thermostat, programmable with digital display, fan switch and 40-90F setpoint range.

  • - AS-G1
    +$139.00
  • AS-G1 T87K Wall Mounted Thermostat With Base (Field Installed)

    +$139.00

    T87K Thermostat Manual

    Single stage heating thermostat with subbase. Includes fan switching relay. Standard round styling suitable for any decor. 40F-90F. setpoint range.

  • - AS-G2
    +$185.00
  • AS-G2 T87K Wall Mounted Thermostat With Base And Locking Guard (Field Installed)

    +$185.00

    T87K Thermostat Manual

    Single stage heating thermostat with subbase and clear plastic locking thermostat guard. Includes fan switching relay. Standard round styling suitable for any decor. 40F-90F setpoint range.

  • - AS-G3
    +$69.00
  • AS-G3 T834N Wall Mounted Thermostat With Fan Switch (Field Installed)

    +$69.00

    T834N Thermostat Manual

    Single stage heating thermostat with fan switch. 50F-90F setpoint range. [2-7/8" W x 4-3/4" H x 1-1/2" D].

  • - AS-G8
    +$152.00
  • AS-G8 T6169C Line Voltage Wall Mounted Thermostat With Base (Field Installed)

    +$152.00

    T6169C Thermostat Manual

    Single stage heating thermostat only. 115 volt operation.

  • - AS-G9
    +$81.00
  • AS-G9 T822K Wall Mounted Thermostat With Base (Field Installed)

    +$81.00

    T822K Thermostat Manual

    Single stage heating thermostat only. 24 volt operation.

  • - AS-P5
    +$83.00
  • AS-P5 24 Volt S.P.S.T. Control Relay (Field Installed)

    +$83.00

    This field installed control relay is most commonly used in conjunction with wall mounted thermostats that have fan only switches. The 24 Volt fan-on signal from the thermostat goes to the relay, the relay sends 115 Volts to power on the fan without heating. Control relays are also REQUIRED if wiring multiple heaters to a single thermostat. 25 Volt coil, 18 Amp maximum contact rating at 115 Volts.
  • - AS-G6
    +$78.00
  • AS-G6 Locking Thermostat Guard (Field Installed)

    +$78.00

    Universal clear plastic locking thermostat cover for use with all thermostats.
  • - TRSK38-4
    +$159.00
  • TRSK38-4 Set Of 4 Threaded Rod Vibration Isolation Suspension Kits 3/8" (Field Installed)

    +$159.00

    The threaded rod vibration isolation suspension kits include 2 Ft. long threaded rods, rubber vibration isolators and heavy duty ceiling support brackets. Use this kit to lower the unit heater 2 Ft. below the ceiling. Ceiling suspension bolts are not included.
  • - AS-X4-030
    +$108.00
  • AS-X4-030 90 Degree Nozzle (Field Installed)

    +$108.00

    90 Degree Downturn Nozzle Installers Guide

    Directs the discharge air at a 90 degree angle. Louvers are supplied with the unit heater and must be reinstalled in the nozzle discharge.

  • - AS-X2-030
    +$59.00
  • AS-X2-030 30 Degree Nozzle (Field Installed)

    +$59.00

    30 Degree Downturn Nozzle Installers Guide

    Directs the discharge air at a 30 degree angle. Air can be directed up to 60 degrees by adjusting the horizontal louvers. Louvers are supplied with the unit heater and must be reinstalled in the nozzle discharge.

  • - AS-X3-030
    +$84.00
  • AS-X3-030 60 Degree Nozzle (Field Installed)

    +$84.00

    60 Degree Downturn Nozzle Installers Guide

    Directs the discharge air at a 60 degree angle. Air can be directed up to 90 degrees by adjusting the horizontal louvers. Louvers are supplied with the unit heater and must be reinstalled in the nozzle discharge.

  • - AS-VC-4
    +$103.00
     
    Qty:
  • AS-VC-4 4" Vent Termination Cap (Field Installed)

    +$103.00

    This vent termination cap attaches to the end of the venting system. This is an all weather cap that can be mounted vertically or horizontally. If you're using these vent termination caps on separated combustion systems with 2 separate vent runs (not utilizing the concentric adapter kit), the pricing includes 2 caps. 1 cap is used at the end of the intake air vent, and 1 cap is used for the exhaust air vent. Please review the gas unit heater installer's guide for detailed venting recommendations. These are the manufacturer's recommendations only. Your local building codes will specify actual venting requirements for your town. Interconnecting vent pipe should be purchased locally after the heater has been installed and detailed measurements have been taken.
  • - AS-X7-4
    +$226.00
  • AS-X7-4 Concentric Vent Adapter Kit (Field Installed)

    +$226.00

    Concentric Vent Adapter Kit Installers Guide

    Allows for one combustion air opening through a structure. One kit permits for either horizontal or vertical venting applications. Interconnecting vent pipe is not included. Refer to the installers guide above for details..

  • - CKNTPDS030-52
    +$40.00
  • CKNTPDS030-52 Natural Gas To Propane Conversion Kit (Field Installed)

    +$40.00

    Natural Gas To LP Installers Guide

    Fuel conversion kit. Buy the heater set-up from the factory with the fuel type you need. Only order this kit if you might change the fuel source down the road.

  • - CKPTNDS030-38
    +$40.00
  • CKPTNDS030-38 Propane To Natural Gas Conversion Kit (Field Installed)

    +$40.00

    Propane To Natural Gas Installers Guide

    Fuel conversion kit. Buy the heater set-up from the factory with the fuel type you need. Only order this kit if you might change the fuel source down the road.

  • - AS-A7
    +$159.00
  • AS-A7 High Gas Pressure Regulator (Field Installed)

    +$159.00

    High Gas Pressure Regulator Installation Guide

    High gas pressure regulator used to knock down high gas pressures. This regulator is rated for 1/2-2 PSI inlet pressures. Required where main line pressure exceeds 14" W.C. You must specify the incoming line pressure in the notes section during checkout.

Total: $0.00

Usually Ships: 2-3 Weeks.  Certain Options May Extend The Lead Time.


Specification

Weight (Pounds)

70.0000

Fuel Type

Propane

Fan Type

Propeller Fan

Casing Style

Low Profile

Heat Exchanger Material

Aluminized Steel

Fuel Control

1 Stage (On/Off)

Dimensions

13.25"H x 30"W x 25.88"D, Gas Connection: .50", Vent Connection: 4"

Voltage Info

208 Volts 1 Phase 60 Hertz

Capacity Info

30,000 BTU/HR

Airflow

370 CFM

Description

Beacon Morris BRT030A1PSA21A Features:
• 81% Thermal Efficiency.
• Certified For Residential Use.
• 24 Volt Control Circuit.
• Integral Power Venter.
• Direct Spark Ignition.
• 20 Gauge Cabinet With Baked Enamel Finish.
• 1 Year Parts Warranty + 10 Year Heat Exchanger Warranty.
• OSHA Fan Guard.
• Right Hand Control Access (Field Convertible to Left Hand).
• High Limit Safety Switch.
• Air Pressure Switch.
• Factory Built For Your Fuel Type. No complex field conversion kits.
• Field Convertible to Separated Combustion With Accessory Concentric Vent Kit.
• Easy Access Control Panel.

Literature
Warranty
Q & A
Reviews

Write Your Own Review

You're reviewing: Beacon Morris | BRT030A1PSA21A Unit Heater | 30,000 BTU/HR Input | Propane | 208 Volts 1 Phase | Aluminized Steel Heat Exchanger | 0-4,999 Ft. Elevation

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall