Berko | CUHS94510483FF Stock Electric Cabinet Unit Heater | 10.0/6.7 KW | 480 Volt 3 Phase / 277 Volt 1 Phase 12/37 Amps

26.375"H x 45"W x 9.75"D

34,130/22,867 BTU/HR or 10.0/6.7 KW

FEATURES
• Factory mounted thermostat is included.
• Factory supplied as three phase, field convertible to single phase in 240 and 208 volt and from 480 volt three phase to 277 volt single phase.
• Front inlet / front outlet, may be field converted to front in / top out, bottom in / front out, or bottom in / top out.
• Cabinet constructed of heavy 16 gauge cold-rolled steel structurally formed to provide strength and rigidity for heavy wear and usage.
• Neutral grey epoxy finish.
• High / low heat setting.
• Terminals for direct connection to BAS or EMS.
• 1/8 hp, PSC motors are two-speed (1550/1450 rpm).
• Motors are resilient mounted with automatic thermal overload protection.
• Motor fuse protection is provided on all heaters to meet UL, cUL and NEC requirements.
• Plate fin element - steel fins are copper brazed to low watt density, steel-sheathed tubular heating elements. (90/20 NiCh resistance wire). Element is finished with aluminized paint for corrosion resistance. Fins and elements are arranged in a uniform grid pattern and fit closely into the discharge area to assure that all outgoing air passes through the heating element.
• Thermal safety cutout installed in direct contact with the heating element automatically shuts off the heater in the event of overheating due to any cause and reactivates the heater when operating temperature returns to normal. An optional manual reset thermal safety cutout is available.
• Automatic fan delay eliminates cold drafts on start-up and discharges residual heat from the heater body during shut down.
• Silent relays, instead of conventional contractors, eliminate the noise of contactor opening and closing.
• Each heater is supplied with a throw-away air filter mounted in the inlet air stream.
• A front cover interlock is a standard safety feature that de-energizes the heater when the front cover is removed.
• U.L. listed.
• Power supply connections In control compartment.