JavaScript seem to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.
Price as configured: $0.00
Certain options and accessories may extend the lead time. Please see options and accessories for details. Ships via Truck Freight.
Double click on above image to view full picture
Chromalox | DRA-15-43 Portable Spot Industrial Salamander Blower Heater | 15.0 KW | 480 Volt 1/3 Phase 31.4/18.2 Amps | PCN 295582
Total: $0.00
Usually Ships: 2-5 Business Days. Certain Options May Extend The Lead Time.
65.0000
34.25"H x 27.6875"W x 23.4375"D
480 Volts 1/3 Phase 60 Hertz
51,180 BTU/HR or 15.0 KW
Features: Heating Cylinder A structural frame consisting of 2 spun steel rings and 2 formed steel channels support a 20 gauge steel cylinder phosphate coated for corrosion resistance, and finished in red polyester powder coat paint. The heating cylinder pivots vertically to direct air flow. Leg Assembly Each side consists of a one piece, 12 gauge, formed steel member, which accepts a steel tubular handle, held in place with a 1 1/2" long x 1/4" bolt on each side. The handle can be raised from the shipping position if desired. The rubber, pneumatic wheels are 10" diameter and 3 1/2" wide to provide ease of transporting the heater on irregular and gravel surfaces. The large wheels make it easy to roll up stairways without damage to decorative step surfaces. Fan Assembly The self-centering fan assembly consists of a totally enclosed, permanently lubricated motor and a dynamically balanced aluminum fan blade for smooth, quiet operation. Controls A thermostat, with a temperature range of 40 °F to 100 °F is included, with a full off position, a fan only position and an adjustable range of temperature settings in the heating mode position. Each unit includes a 3 pole magnetic contactor and auto-reset thermal cutout. 480 Volt and 600 volt units also include a motor relay and 120 volt control voltage transformer for personnel safety. Safety Guards Front and rear grills are 10 gauge finished in black polyester powder coat and are designed to meet OSHA safety requirements. Heating Assembly The patented metal sheath Fintube® heating elements consist of steel fins furnace brazed on industrial grade .475 diameter steel sheath tubular heaters for maximum heat transfer. The elements are held in place with steel bulkhead fittings for durability. The elements feature a high temperature finish for corrosive protection. Applications • Any Commercial or Industrial Application Needing Instant Fan Forced Heat • Building Construction • Curing Plaster and Concrete • Warming Workers • Thawing Frozen Pipes • Thawing Railroad Cars • Heating Tents • Non-Hazardous Areas For best results, use in an enclosed area with ceiling heights below 15 feet. Advantages • No Fumes Or Annoying Smell • Safer, No Open Flame • Safe To Operate In Unattended Areas • No Moisture And Fumes Added To The Air - Burning Oil And Gas Fuels Adds Moisture And Fumes To The Air • Minimum Maintenance • No Fuel To Store • Long Horizontal Air Throw • Quiet Operation • Easy Installation • Fan Only For Summer Cooling • Single Knob Adjustment Of Fan Direction • No Assembly Required • Long Life Industrial Finned Tubular Heating Elements • High Limit Thermal Cut-out Switch
You have no items to compare.
