Free Ground Shipping To The Continental US
Contact H-Mac

Toll Free: 877-301-4660

Call For Volume Discounts

Electric Portable Blower Heaters

Quick Facts
Use a portable blower heater to keep comfortable no matter how cold it gets outside. Save energy by just heating the area you are in instead of keeping the whole house or building warm.

Items 1 to 16 of 42 total

per page
Page:
  1. 1
  2. 2
  3. 3
Set Descending Direction
  • Berko BDH1583A

    Berko | BDH1583A Portable Electric Blower Heater | 15 KW | 208 Volt 3 Phase 41.8 Amps

    $987.00
  • Berko BDH1583A

    Berko | BDH1583A Portable Electric Blower Heater | 15 KW | 208 Volt 3 Phase 41.8 Amps

    This high output, industrial grade, portable electric blower is a working monster. The BDH series heater can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. Practical uses are factories, enclosed areas where the ceiling height is no higher than 15 feet, assembly areas, enclosed smoking areas, building construction where "localized" temporary heat is needed, and repair stations. These are just a few examples of where BDH Series portable blower heaters can be used.
  • Berko BDH2043A

    Berko | BDH2043A Portable Electric Blower Heater | 20 KW | 480 Volt 1/3 Phase 41.6/24.4 Amps

    $1,142.00
  • Berko BDH2043A

    Berko | BDH2043A Portable Electric Blower Heater | 20 KW | 480 Volt 1/3 Phase 41.6/24.4 Amps

    This high output, industrial grade, portable electric blower is a working monster. The BDH series heater can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. Practical uses are factories, enclosed areas where the ceiling height is no higher than 15 feet, assembly areas, enclosed smoking areas, building construction where "localized" temporary heat is needed, and repair stations. These are just a few examples of where BDH Series portable blower heaters can be used.
  • Berko BDH3043A

    Berko | BDH3043A Portable Electric Blower Heater | 30 KW | 480 Volt 3 Phase 36.3 Amps

    $1,235.00
  • Berko BDH3043A

    Berko | BDH3043A Portable Electric Blower Heater | 30 KW | 480 Volt 3 Phase 36.3 Amps

    This high output, industrial grade, portable electric blower is a working monster. The BDH series heater can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. Practical uses are factories, enclosed areas where the ceiling height is no higher than 15 feet, assembly areas, enclosed smoking areas, building construction where "localized" temporary heat is needed, and repair stations. These are just a few examples of where BDH Series portable blower heaters can be used.
  • BSDH3043

    Berko | BSDH3043 High Temperature Electric Blower Heater | 30 KW | 480 Volt 3 Phase 37.2 Amps

    From: $4,347.00

    To: $6,768.00

  • BSDH3043

    Berko | BSDH3043 High Temperature Electric Blower Heater | 30 KW | 480 Volt 3 Phase 37.2 Amps

    High BTU per hour heater without the exhaust fumes or moisture associated with gas heat. Useful for comfort heating and process heating applications up to 180° F. Can be operated unattended without risk fire or need for refueling. Fan-only operation for air recirculation, fume exhaust, or fresh air supply. Dual thermostat operation. 120 volt control supply. 120 volt control transformer with pilot light. Over temperature limit protects unit from low air flow conditions. Powder coated corrosion resistant 20 gauge steel housing. 10" pneumatic wheels and 4" locking caster. Inlet and outlet flexible duct accessories available for ducting up to 165'. Adjustable damper accessory allows outlet temperature to be controlled.
  • BSDH4843

    Berko | BSDH4843 High Temperature Electric Blower Heater | 48 KW | 480 Volt 3 Phase 58.9 Amps

    From: $5,240.00

    To: $7,661.00

  • BSDH4843

    Berko | BSDH4843 High Temperature Electric Blower Heater | 48 KW | 480 Volt 3 Phase 58.9 Amps

    High BTU per hour heater without the exhaust fumes or moisture associated with gas heat. Useful for comfort heating and process heating applications up to 180° F. Can be operated unattended without risk fire or need for refueling. Fan-only operation for air recirculation, fume exhaust, or fresh air supply. Dual thermostat operation. 120 volt control supply. 120 volt control transformer with pilot light. Over temperature limit protects unit from low air flow conditions. Powder coated corrosion resistant 20 gauge steel housing. 10" pneumatic wheels and 4" locking caster. Inlet and outlet flexible duct accessories available for ducting up to 165'. Adjustable damper accessory allows outlet temperature to be controlled.
  • BSDH6043

    Berko | BSDH6043 High Temperature Electric Blower Heater | 60 KW | 480 Volt 3 Phase 73.3 Amps

    From: $6,067.00

    To: $8,488.00

  • BSDH6043

    Berko | BSDH6043 High Temperature Electric Blower Heater | 60 KW | 480 Volt 3 Phase 73.3 Amps

    High BTU per hour heater without the exhaust fumes or moisture associated with gas heat. Useful for comfort heating and process heating applications up to 180° F. Can be operated unattended without risk fire or need for refueling. Fan-only operation for air recirculation, fume exhaust, or fresh air supply. Dual thermostat operation. 120 volt control supply. 120 volt control transformer with pilot light. Over temperature limit protects unit from low air flow conditions. Powder coated corrosion resistant 20 gauge steel housing. 10" pneumatic wheels and 4" locking caster. Inlet and outlet flexible duct accessories available for ducting up to 165'. Adjustable damper accessory allows outlet temperature to be controlled.
  • Chromalox DRA-07-23

    Chromalox | DRA-07-23 Portable Spot Industrial Salamander Blower Heater | 7.5/5.6 KW | 240/208 Volt 1/3 Phase 31.5/18.3 Amps | PCN 295531

    $965.00
  • Chromalox DRA-07-23

    Chromalox | DRA-07-23 Portable Spot Industrial Salamander Blower Heater | 7.5/5.6 KW | 240/208 Volt 1/3 Phase 31.5/18.3 Amps | PCN 295531

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Chromalox DRA-07-83

    Chromalox | DRA-07-83 Portable Spot Industrial Salamander Blower Heater | 7.5 KW | 208 Volt 1/3 Phase 36.3/21.0 Amps | PCN 295523

    $965.00
  • Chromalox DRA-07-83

    Chromalox | DRA-07-83 Portable Spot Industrial Salamander Blower Heater | 7.5 KW | 208 Volt 1/3 Phase 36.3/21.0 Amps | PCN 295523

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Chromalox DRA-10-23

    Chromalox | DRA-10-23 Portable Spot Industrial Salamander Blower Heater | 10.0/7.5 KW | 240/208 Volt 1/3 Phase 40.8/23.7 Amps | PCN 295558

    $1,037.00
  • Chromalox DRA-10-23

    Chromalox | DRA-10-23 Portable Spot Industrial Salamander Blower Heater | 10.0/7.5 KW | 240/208 Volt 1/3 Phase 40.8/23.7 Amps | PCN 295558

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Chromalox DRA-10-83

    Chromalox | DRA-10-83 Portable Spot Industrial Salamander Blower Heater | 9.75 KW | 208 Volt 1/3 Phase 47.1/27.3 Amps | PCN 295540

    $1,037.00
  • Chromalox DRA-10-83

    Chromalox | DRA-10-83 Portable Spot Industrial Salamander Blower Heater | 9.75 KW | 208 Volt 1/3 Phase 47.1/27.3 Amps | PCN 295540

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Chromalox DRA-15-23

    Chromalox | DRA-15-23 Portable Spot Industrial Salamander Blower Heater | 15.0/11.2 KW | 240/208 Volt 3 Phase 36.3 Amps | PCN 295574

    $1,038.00
  • Chromalox DRA-15-23

    Chromalox | DRA-15-23 Portable Spot Industrial Salamander Blower Heater | 15.0/11.2 KW | 240/208 Volt 3 Phase 36.3 Amps | PCN 295574

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Chromalox DRA-15-43

    Chromalox | DRA-15-43 Portable Spot Industrial Salamander Blower Heater | 15.0 KW | 480 Volt 1/3 Phase 31.4/18.2 Amps | PCN 295582

    $1,072.00
  • Chromalox DRA-15-43

    Chromalox | DRA-15-43 Portable Spot Industrial Salamander Blower Heater | 15.0 KW | 480 Volt 1/3 Phase 31.4/18.2 Amps | PCN 295582

    The Chromalox DRA is a rugged industrial grade, self contained, highly mobile, electric blower heater. The DRA can be left unattended without the threat of poisoning from combustion by-products associated with fuel fired heaters. The built in safety features include an adjustable thermostat to control the outlet air temperature, auto-reset cutouts for the fan motor and heating elements. The thermostat provides settings for full off, fan only and temperature control in the heating setting. Dragon heaters feature a large, easily accessible control and wiring compartment containing a magnetic contactor; additional safety is provided by a 120 volt control voltage transformer and motor starter on 480 and 600 volt units. The bright red polyester powder coated heating cylinder is highly visible and can be rotated to direct heat or fan driven air movement where it is needed. For assured safety, all standard units meet the requirements of UL (File No. E207486) and CSA (File No. LR40859).
    All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.

Items 1 to 16 of 42 total

per page
Page:
  1. 1
  2. 2
  3. 3
Set Descending Direction