Free Ground Shipping To The Continental US
Contact H-Mac

Toll Free: 877-301-4660

Call For Volume Discounts

  • Home /
  • Markel | FEP-1727-1RA Hazardous Location Electric Explosion Proof Convector | 1,700 Watts | 277 Volt 1 Phase 6.1 Amps

Markel | FEP-1727-1RA Hazardous Location Electric Explosion Proof Convector | 1,700 Watts | 277 Volt 1 Phase 6.1 Amps

Price as configured: $0.00

Usually Ships: 3-4 Weeks

Certain options and accessories may extend the lead time. Please see options and accessories for details. Ships via Truck Freight.

Shipping

Quick Overview

Markel FEP T-3A Series convector heaters are designed to heat areas classified as hazardous locations designated for Class 1, Groups B, C & D, Division 1 and 2 180°C / 356°F environments. Typical applications involve petroleum refineries, gasoline storage and dispensing areas, industrial firms that use flammable liquids in dip tanks for parts cleaning, petrochemical manufacturing facilities, dry cleaning plants, utility and natural gas plants, aircraft hangars, fueling areas, and many other hazardous areas.

Markel FEP-1727-1RA

Double click on above image to view full picture

Zoom Out
Zoom In
  • Free Ground Shipping to the Continental US
  • Multiple Item Discounts. Call for a custom quote!
  • See a lower price elsewhere? Call us!
 
Configure

Configure Product


Markel | FEP-1727-1RA Hazardous Location Electric Explosion Proof Convector | 1,700 Watts | 277 Volt 1 Phase 6.1 Amps

  • No Thermostat (Field Provided By Others)
    - No-Thermostat

    • No Thermostat (Field Provided By Others)

    +$0.00

  • Markel EPETD8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)
    - MarkelEPETD8D
    +$228.00

    • Markel EPETD8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

    +$228.00

    Markel EPETD8D Installation Guide

    - Rated for 22Amps, 120-277Volts.

    - Suitable for line or low voltage applications.

    - 50-90 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Plastic knob.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

  • Markel FEP-T1 Line Voltage Single Pole Thermostat EPETD8S (Factory Installed)
    - MarkelFEP-T1
    +$289.00

    • Markel FEP-T1 Line Voltage Single Pole Thermostat EPETD8S (Factory Installed)

    +$289.00

    - 50-90 Degree F Setpoint Range
  • Markel FEP-T2 Line Voltage Double Pole Thermostat EPETD8D (Factory Installed)
    - MarkelFEP-T2
    +$300.00

    • Markel FEP-T2 Line Voltage Double Pole Thermostat EPETD8D (Factory Installed)

    +$300.00

    - 50-90 Degree F Setpoint Range
  • Markel FEP-C1-TD Control Section W/ Transformer, 24V Contactor, SP Stat, And Disc (Factory Installed)
    - MarkelFEP-C1-TD
    +$993.00

    • Markel FEP-C1-TD Control Section W/ Transformer, 24V Contactor, SP Stat, And Disc (Factory Installed)

    +$993.00

    - Control Section With Transformer, 24V Contactor, Single Pole Thermostat, And Disconncect (Factory Installed).

    - This option is not NEMA washdown rated and is not rated for Group B atmospheres.

    - 40-90 Degree F Thermostat setpoint range.

  • Markel FEP-C1-TDP Ctrl Sect W/ Transformer, 24V Contactor, SP Stat, Disc, And Pilot Light (Factory Installed)
    - MarkelFEP-C1-TDP
    +$1,032.00

    • Markel FEP-C1-TDP Ctrl Sect W/ Transformer, 24V Contactor, SP Stat, Disc, And Pilot Light (Factory Installed)

    +$1,032.00

    - Control Section With Transformer, 24V Contactor, Single Pole Thermostat, Disconncect, And Pilot Light (Factory Installed).

    - This option is not NEMA washdown rated and is not rated for Group B atmospheres.

    - 40-90 Degree F Thermostat setpoint range.

  • Markel EPETD8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)
    - MarkelEPETD8S
    +$217.00

    • Markel EPETD8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

    +$217.00

    Markel EPETD8S Installation Guide

    - Rated for 22Amps, 120-277Volts.

    - Suitable for line or low voltage applications.

    - 50-90 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Plastic knob.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

  • Markel EPETP8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)
    - MarkelEPETP8S
    +$226.00

    • Markel EPETP8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

    +$226.00

    Markel EPETP8S Installation Guide

    - Rated for 22Amps, 120-480Volts.

    - Suitable for line or low voltage applications.

    - 50-90 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Plastic knob.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

  • Markel EPETP8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)
    - MarkelEPETP8D
    +$237.00

    • Markel EPETP8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

    +$237.00

    Markel EPETP8D Installation Guide

    - Rated for 22Amps, 120-480Volts.

    - Suitable for line or low voltage applications.

    - 50-90 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Plastic knob.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

  • Markel HLT-1 Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)
    - MarkelHLT-1
    +$238.00

    • Markel HLT-1 Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

    +$238.00

    - Rated for 22Amps, 120-277Volts.

    - Suitable for line or low voltage applications.

    - 40-110 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Screwdriver temperature adjustment slot.

    - External bulb and capillary sensor.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

  • Markel HLT-2 Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)
    - MarkelHLT-2
    +$251.00

    • Markel HLT-2 Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

    +$251.00

    - Rated for 22Amps, 120-277Volts.

    - Suitable for line or low voltage applications.

    - 40-110 Degree F Thermostat setpoint range.

    - 5.75" x 5.625" x 4.5".

    - Screwdriver temperature adjustment slot.

    - External bulb and capillary sensor.

    - Silver-gray finish.

    - Casting top and bottom for 3/4" conduit.

    - 1/2" Thick cast Aluminum housing.

    - NEMA Class 7 Div 1 approved.

    - Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.

Total: $0.00

Usually Ships: 3-4 Weeks.  Certain Options May Extend The Lead Time.


Specification

Weight (Pounds)

80.0000

Dimensions

18"H x 58"W x 9"D

Voltage Info

277 Volts 1 Phase 60 Hertz

Capacity Info

5,802 BTU/HR or 1,700 Watts

Description

Features:
• Bottom In - Front Out air flow.
• Wall mounting bracket supplied.
• Units can not be operated in room ambients exceeding 104°F (40°C).
• Heavy duty 16 Gauge steel with gray epoxy textured powder coated finish.
• 9” minimum clearance from bottom of heater to floor required.
• Stainless steel cartridge element inserted into Aluminum finned Copper sheath.
• Standard unit (without EPET thermostat or control section) is NEMA 4 rated.
Literature
Markel FEP-1727-1RA Catalog
Markel FEP-1727-1RA Installation Guide
Warranty
Markel FEP-1727-1RA Warranty Terms
Q & A
View All Questions And Answers Related To This Product!
Reviews

Write Your Own Review

You're reviewing: Markel | FEP-1727-1RA Hazardous Location Electric Explosion Proof Convector | 1,700 Watts | 277 Volt 1 Phase 6.1 Amps

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall

Product & Model No. Search

Why Choose H-Mac Systems?

  • Free Ground Shipping To The Continental US
  • We Offer Volume Discounts
  • We Are Factory Authorized
  • No Surprises At Checkout
  • See A Lower Price?
    Contact Us!
Compare Products

You have no items to compare.

© 2003 - 2012 H-Mac Systems. All Rights Reserved.
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams net