JavaScript seem to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.
Price as configured: $0.00
Certain options and accessories may extend the lead time. Please see options and accessories for details. Ships via UPS or FedEx Ground. Multiple quantities may ship via truck.
Double click on above image to view full picture
QMark | FDI1504 Floor Drop-In Heater | 1,500/750/1,125/563 Watts | 240/208 Volt 1 Phase 6.3/3.1/5.4/2.7 Amps
FDITSP Installation Guide
- This is a field-installed unit-mounted thermostat kit.
- 55-115 Degree F setpoint range.
- Thermostat is not graduated with temperature.
- The setpoint is adjusted by inserting a small screwdriver through the grill and into the slot in the thermostat shaft.
MS26 Installation Guide
- This is a wall-mounted remote thermostat. Wiring to connect the thermostat and heater is not included.
- 50-80 Degree F setpoint range.
- Thermostat knob is not graduated with temperature, only HI LO.
Total: $0.00
Usually Ships: 2-5 Business Days. Certain Options May Extend The Lead Time.
10.0000
15.75”L x 8.75”W x 6.625”D
240/208 Volts 1 Phase 60 Hertz
5,120/2,560/3,840/1,922 BTU/HR or 1,500/750/1,125/563 Watts
80 CFM
FEATURES • Produces a flow pattern of warm air five feet wide (four feet above floor). Single compact size (15.75" length x 8.75" width x 6 5/8" depth). • Both the FDl1500 and FDl1504 are adaptable from 1500W to 750W. Additionally, the FDl1504 may be operated at 208 volts for an output of 1125W or 563W. • Quick, simple installation. Mounts between floor joists in either direction (parallel or perpendicular to joists). Rough-in the separate housing... then simply insert "plug-in" type heater element and fan assembly. • Heavy-duty grille can take almost any type abuse! • Thermostat accessory kit (optional) easily installed in heater (screwdriver adjusted thru grille). When heater is installed for overall room heating, use a wall thermostat. • Automatic overheat thermal protector and thermal fuse standard. • Heavy-gauge steel housing. • Sandalwood baked enamel grille finish. • 80 CFM. MOUNTING LIMITATIONS Do not install in bathroom or other areas where water may enter heater unit. Do not locate where air flow may be obstructed (under drapes, behind doors, etc.). Keep short sides 36" minimum and long side 3" min. from walls. Do not install in ceiling or wall.
You have no items to compare.
