Thermostats

Chromalox WR80-EP Explosion Proof Remote Thermostat (Field Installed) PCN 266124

<p><a href="http://www.h-mac.com/product-catalogs/chromalox/chromalox-wr80-ep-installation-manual.pdf" target="_blank">Chromalox WR80-EP Installation Guide</a></p>
<p>- 40-90°F Setpoint range.</p>
<p>- Single pole single throw (SPST).</p>
<p>- Class I, Division I, Group D.</p>
<p>- Class II, Division I, Groups E, F, and G.</p>

Markel EPETD8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

<p><a href="http://www.h-mac.com/product-catalogs/markel/markel-epet-series-installation-manual.pdf" target="_blank">Markel EPETD8D Installation Guide</a></p>
<p>- Rated for 22Amps, 120-277Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 50-90 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Plastic knob.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>

Markel EPETD8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

<p><a href="http://www.h-mac.com/product-catalogs/markel/markel-epet-series-installation-manual.pdf" target="_blank">Markel EPETD8S Installation Guide</a></p>
<p>- Rated for 22Amps, 120-277Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 50-90 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Plastic knob.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>

Markel EPETP8D Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

<p><a href="http://www.h-mac.com/product-catalogs/markel/markel-epet-series-installation-manual.pdf" target="_blank">Markel EPETP8D Installation Guide</a></p>
<p>- Rated for 22Amps, 120-480Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 50-90 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Plastic knob.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>

Markel EPETP8S Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

<p><a href="http://www.h-mac.com/product-catalogs/markel/markel-epet-series-installation-manual.pdf" target="_blank">Markel EPETP8S Installation Guide</a></p>
<p>- Rated for 22Amps, 120-480Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 50-90 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Plastic knob.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>

Markel HLT-1 Remote Mounted Single Pole Hazardous Location Thermostat (Field Installed)

<p>- Rated for 22Amps, 120-277Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 40-110 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Screwdriver temperature adjustment slot.</p>
<p>- External bulb and capillary sensor.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>

Markel HLT-2 Remote Mounted Double Pole Hazardous Location Thermostat (Field Installed)

<p>- Rated for 22Amps, 120-277Volts.</p>
<p>- Suitable for line or low voltage applications.</p>
<p>- 40-110 Degree F Thermostat setpoint range.</p>
<p>- 5.75" x 5.625" x 4.5".</p>
<p>- Screwdriver temperature adjustment slot.</p>
<p>- External bulb and capillary sensor.</p>
<p>- Silver-gray finish.</p>
<p>- Casting top and bottom for 3/4" conduit.</p>
<p>- 1/2" Thick cast Aluminum housing.</p>
<p>- NEMA Class 7 Div 1 approved.</p>
<p>- Class I Group C & D, Class II Group E,F,G. Thermostat is not rated for use in Group B environments.</p>