Free Ground Shipping To The Lower 48 States!
  1. Home
  2. Heating
  3. Electric Heaters
  4. Electric Unit Heaters
  5. Hazardous Location Electric Unit Heaters
  6. Chromalox CXH-A-07-43-30-00-20-EP Explosion Proof Heater 7.5KW 480V 3PH 9.7A PCN 026340
Chromalox CXH-A-07-43-30-00-20-EP Explosion Proof Heater 7.5KW 480V 3PH 9.7A PCN 026340
Chromalox CXH-A-07-43-30-00-20-EP Image

Chromalox CXH-A-07-43-30-00-20-EP Explosion Proof Heater 7.5KW 480V 3PH 9.7A PCN 026340

Part Number: Chromalox-CXH-A-07-43-30-00-20-EP
*Add To Cart To View Pricing*
Usually Ships In: 8 Weeks
Ships From: Tennessee - Direct From Chromalox
Ships By: Truck, Curbside, Back Of Truck
Weight: 135 (Lbs.)
Free Ground Shipping to the Lower 48 States
Write a Review

Choose Options

*
*
*

Description

Type CXH-A is designed to heat areas classified as hazardous locations to provide primary or supplementary heating for comfort or freeze protection.

Applications
- Sewage Treatment Plants
- Petrochemical Facilities, Oil Rigs
- Unattended Pumping Stations
- Chemical Storage and Handling Facilities
- Paint Storage Areas
- Grain Elevators
- Coal Preparation Plants
- Aircraft Servicing Areas
- Oil Refineries
- Areas Containing Metal Dusts

Construction
Cabinet - 14 Gauge steel construction with polyester powder coat paint finish.
Adjustable louvers - Control the direction of airflow as needed.
Rugged, seamless, copper heating elements - Are immersed in the sealed liquid-to-air heat exchanger.
Factory sealed heat exchanger - Features steel tubes with integral aluminum fins and filled with glycol-water heat transfer fluid. Safety pressure relief device on the heat exchanger is factory helium leak tested to assure a leak-proof design.
Explosion proof ball bearing motor - Permanently lubricated and equipped with built-in thermal overload protection.
Epoxy coated aluminum Fan - Prevents sparking.

Features
Pre-Wired explosion proof control center with magnetic contactor and control circuit transformer.
Quick-acting auto reset cutout.
Recessed threaded fasteners on top of heater for mounting with threaded rods are standard (threaded rods are NOT included).
Warranty - Limited three year.

Optional Features
- Built-in Thermostat 50 degrees F to 90 degrees F
- Built-in Manual Disconnect Switch
- Pilot Light
- Fan Selector Switch
-Pole, Wall, Or Ceiling Mounting Bracket

Designed for Areas Classified
Low operating temperature for atmospheres having an ignition temperature higher than 165 degrees C (329 degrees F) Code T3B.
- Class I, Group C, D - Divisions 1 & 2
-  Class II, Groups E, F, G - Divisions 1 & 2

Advantages
- Easy Installation
- Safe, Propylene Glycol Heat Transfer Fluid
-  Low Surface Temperature
-  Wall, Pole or Ceiling Mounting (With Optional Brackets)
-  Built-in Controls
-  Virtually Maintenance Free
-  Corrosion Resistant
-  120V Control
-  Rugged and Versatile

Recently Viewed Items