Free Ground Shipping To The Lower 48 States!
  1. Home
  2. Heating
  3. Electric Heaters
  4. Electric Ceiling Heaters
  5. Markel F3474A1 Surface Mounted Ceiling Heater, 4KW, 208V 1PH 19.2A
Markel F3474A1 Surface Mounted Ceiling Heater, 4KW, 208V 1PH 19.2A
Markel F3474A1 Image

Markel F3474A1 Surface Mounted Ceiling Heater, 4KW, 208V 1PH 19.2A

Part Number: Markel-F3474A1
Suggested Retail: $1,164.74

H-Mac Price$895.95
Usually Ships In: 4 Weeks
Ships From: Tennessee - Factory Direct
Ships By: UPS or FedEx Ground. Multiple quantities may ship via truck.
Weight: 32 (Lbs.)
Free Ground Shipping to the Lower 48 States
Write a Review

Choose Options

*

Description

CONSTRUCTION: Made in U.S.A.
Contractor shall supply and install heavy duty ceiling mounted forced air electric heater(s) of the wattage, voltage and phase as indicated on the plans. The heater shall so be designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by mean of an electric motor and axial flow fan blade.
MOTOR: Motor shall be permanent lubricated, unit bearing, totally enclosed shaded pole type with impedance protection. Motors shall operate at no more than 1300 RPM and shall be same voltage as the heater.
PERFORMANCE: Heaters shall have a rating of 600 CFM at 1,000 F.P.M.
ELEMENT: Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to common corrosion resistant steel fins. Each sheathed element shall consist of helically coiled Nickel Chromium alloy resistant wire completely embedded in and surrounded by Magnesium Oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2 inch cold conductor pins extending into sheath and shall have a density of no more than 60 watts per inch.
THERMAL OVERLOAD: Heaters shall be equipped with a manual reset thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded. For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset. Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted.
COMMERCIAL AND INSTITUTIONAL APPLICATIONS: Use in - vestibules, entrance ways, lobbies, rest rooms and small office and guard building applications.

Related Units, Accessories And OEM Replacement Parts

Recently Viewed Items