Free Ground Shipping To The Lower 48 States!
  1. Home
  2. Heating
  3. Electric Heaters
  4. Electric Wall Heaters
  5. QMark CWH1202DSF Wall Heater, 2/1/1.5/0.75KW, 240/208V 1PH 9/5/8/4A
QMark CWH1202DSF Wall Heater, 2/1/1.5/0.75KW, 240/208V 1PH 9/5/8/4A
Qmark CWH1202DSF Electric Wall Heater

QMark CWH1202DSF Wall Heater, 2/1/1.5/0.75KW, 240/208V 1PH 9/5/8/4A

Part Number: QMark-CWH1202DSF
Suggested Retail: $250.87

H-Mac Price$192.98
2 In Stock, Orders Placed By 3pm EST Ship Same Day (Weekends And Holidays Excluded)
Ships From: H-Mac In Massachusetts
Ships By: Free Ground, Or Choose Expedited Shipping At Checkout
Weight: 10.625 (Lbs.)
Write a Review

Choose Options

*
*

Description

ARCHITECTÆS AND ENGINEERÆS SPECIFICATIONS*
The heating equipment shall include an electric automatic fan forced air heater suitable for small area heating, as manufactured by QMark«, a Marley Engineered Products« Brand, Bennettsville, SC. The heater shall be designed for wall mounting, recess or surface. Heaters shall be cETLus listed.
BACK BOX: The back box shall be designed as a recessed rough-in box in either masonry or frame installations and is also used when surface mounting frames are used in surface mounting installations. The back box shall be heavy gauge galvanized steel and shall contain knockouts through which power leads enter.
INNER FRAME ASSEMBLY: The heater assembly, which fits into the back box, shall consist of a heavy gauge steel fan panel to which all of the operational parts of the heater are mounted. The inner frame assembly shall be completely prewired.
HEATING ELEMENT: The heating element shall be of the non-glowing design consisting of an 80/20 nickel-chromium resistance wire enclosed in a steel sheath to which plate fins are copper brazed. The element shall cover the entire air discharge area to ensure uniform heating of all discharged air. It shall be warrantied for 5 years.
ON/OFF SWITCH: A double-pole, single throw on/off switch shall be mounted on the back box for positive disconnect of power supply. It will be completely concealed behind the front cover.
Motor AND CONTROLS: The fan Motor shall be impedance protected, permanently lubricated. Fan control shall be of the bi-metallic, snap-action type and shall activate fan after heating element reaches operating temperature, and continue to operate the fan after the Thermostat is satisfied and until all heated air has been discharged. The Thermostat shall be single-pole type on all models. Thermal cutout shall be selfhold (manual-reset) type designed to shut off heat in the event of overheating. The fan shall be four-bladed aluminum. A backup (End of Life) thermal fuse shall be provided for additional safety.
SURFACE MOUNTING FRAME: The surface mounting frame shall be of heavy gauge steel designed to mount around the back box for a finished surface installation. Slot knock outs shall be provided for power supply conduit.

Recently Viewed Items